This community is for dental professionals and enthusiasts of our products and services.  
Before you share and discuss in our community, build your professional profile by register for our platform.


Register Here

This question has been flagged
As a moderator, you can either validate or reject this answer.
Accept Rejeitar
Autor Best Answer

Sandblasting before sintering allows us to achieve a much rougher surface than sandblasting after sintering. If you want a rough surface after sintering, you need to exert a lot of pressure, which leads to micro-cracks in the material, weakening the implant system. However, if the surface is roughened before sintering, you need less power during the sintering phase, minimizing the risk of potential micro-cracks. In the subsequent sintering process any micro-cracks will be closed due to the shrinkage. Thanks to this manufacturing method, Patent™ implants have a roughened surface with a 5x larger surface area than a machined surface, without jeopardizing the implants strength.

Avatar
Descartar

Your Answer

Please try to give a substantial answer. If you wanted to comment on the question or answer, just use the commenting tool. Please remember that you can always revise your answers - no need to answer the same question twice. Also, please don't forget to vote - it really helps to select the best questions and answers!